one.A connecting link of an O-ring Chain for common application is pre-coated with grease at the pins. Ahead of connection, verify the grease about the surfaces of pins, and if your amount of grease is little, apply grease with bare hands. (If gloves are used, the grease might be absorbed from the gloves.)
Instance: Once the connecting hyperlink (I) of an O-ring chain for common application is
shipped, O-rings are fitted at the roots in the pins. Should the O-rings come loose as a result of vibration throughout transport, refit the O-rings in for the roots on the pins.
In this instance, make sure you return the grease collected with the roots on the pins to the central surfaces with the pins, additional at portion A than at portions B shown during the over illustration. (Portions A is worn as a result of sliding together with the bushings.)
two.The chain might be most simply connected on the teeth of the sprocket. Engage the links at each ends on the chain using the sprocket teeth and match connecting pins. When the sprocket could be moved, the chain may also be linked about the loosened side.
3. Connecting method
one.Confirm that O-rings are connected to the roots from the pins.
2.In the event the quantity of grease utilized on the connecting pins is little, coat the pins with grease in the central portions.
three.Insert the connecting pins in to the bushings of the inner hyperlinks at the two ends.
4.Confirm that the grease is applied on the total encounter of your O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and when pressing the connecting plate, install the spring clip. Verify no matter whether the head (the finish with no split) of your spring clip is turned from the feeding path on the chain. (See the following illustration.)
6.You’ll want to verify that the spring clip is securely fitted from the clip grooves of your connecting pins.
This completes jointing of the connecting link. Note that grease to the surfaces of connecting pins and O-rings is usually eliminated in the course of set up perform. In this case, re-grease applying the grease about the surface of your base chain or even the grease from the polyethylene bag in which the connecting website link was contained.