Why Coupling Grease?
Adequate lubrication 
is essential for satisfactory gear coupling operation. Gear Coupling Grease is particularly made for gear coupling applications to improve coupling life while drastically minimizing upkeep time. Its high viscosity base oil and tackifier combine to maintain the grease in area and avoid separation and it truly is in total compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces generally observed in couplings. Bearing or standard purpose greases are likely to separate and eliminate effectiveness due to substantial centrifugal forces over the several ingredients at large rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication attributes, accumulate in the gear tooth mesh place leading to premature coupling failure. Gear Coupling Grease is designed to extremely resistant to centrifugal separation of your oil and thickener, which will allow the lubricant for being utilised for a fairly extended period of time.
One of many secrets for the results of Gear Coupling Grease is the variable consistency through the entire doing work cycle with the application. The consistency of our gear coupling grease changes with the operating conditions. Operating in the lubricant below real support disorders leads to the grease to grow to be semi-fluid, functionally solash lubricating the put on surfaces of the coupling. Since the grease cools, it returns towards the authentic consistency, thereby preventing leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and five lb. cans.
Attributes
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
High load carrying capabilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in area underneath large speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
